|
Novak 1S LiPo Booster Module |
|
|
|
|
|
Compatiblity |
|
12R5.1 Factory Team Kit
,
CRC Gen-XL Carpet Knife 1/12 Pan Car Kit - CLN3202
,
CRC Gen-X 10 Le Graphite 1/10 Pan Car Kit - CLN1712
,
CRC Gen-Xi Inline 1/12 Pan Car Kit
,
RM01 Tamiya 1/12 Toyota Tom's 84C RM-01 Kit
,
Factory Team RC10R5 Kit
,
RM01 Newman Joest Racing Porsche
,
Associated 1/12 RC12R5.2 Factory Team Kit
,
Xti 1/12th Scale Car Kit
,
1/10 Rebel Pan Car Kit
,
RM01X Chassis Kit
,
CRC Gen-X10-SE 200mm WGT Kit
,
1/12 CK Xti - Altered Ego
,
XRAY X12 2015 Link Spec 1/12 Pan Car Kit
,
XRAY X10 2015 Spec 1/10 GT Pan Car
,
Lightning12 Dynamics Edition 1:12 Pan Car Kit
,
Lightning10 1:10 Pan Car Kit
,
Yokomo R12C3 Competition 1/12 Pan Car Kit
,
VBC Racing - Lightning12 Version 2 1/12 Pan Car Kit
,
1/12 Xti-Wc Car Kit
,
Yokomo R12 C3.1 Competition 1/12 Pan Car Kit
,
XRAY X12 2016 Specs 1/12 Pan Car Kit
,
XRAY X12 2017 Specs 1/12 Pan Car Kit
|
Description |
|
| The Novak 1S LiPo Booster Module (#5477) is for single-cell racing it replaces the receiver battery pack and will provide a constant 6 volts and 3 amps of power to the receiver and servo in your race set-up. This module connects to your main battery pack and will actually &ldquoboost&rdquo the battery pack&rsquos 3-4 volts to a standard 6 volts for the duration of the run which allows the receiver and servo to operate as they are intended to. There is no need for special wiring or recharging of a receiver battery pack. Simply connect the module&rsquos power wires to the main battery pack or the ESC&rsquos battery terminals, and plug the harness into your receiver&rsquos battery slot.
The Novak 1S Booster Module easy to connect, extremely small and lightweight. It is compatible with brushless or brush speed controls that would normally operate with a 2-3S LiPo pack. By increasing the battery pack voltage to the receiver and servo, the module allows you to use any radio receiver in single-cell applications, including spread spectrum radios. The usual voltage fluctuations that cause reception issues with your radio using 1S LiPo packs are no longer a concern. It is recommended to use the Novak Glitch Buster Capacitor (#5626) with 2.4GHz radio tems to ensure trouble-free operation.
Note: This unit replaces the Smart Boost 1-Cell Step-Up Module (#5474), and does not include LiPo cutoff circuitry.
FEATURES
- Increases a 1-cell Li-Po battery pack's voltage from 3.3V - 4.2V to 6V, which provides enough power to run almost any servo or receiver
- Provides consistent power to vehicle&rsquos electronics during the entire charge
- On/Off Switch for clean installation and easy operation
- Universal JST Plug that fits all popular brand receivers
- Compatible with brushless and brush speed controls
SPECIFICATIONS
- Module Size: 0.39&rdquo x 1.18&rdquo (10 x 30 mm)
- Weight: 0.43 oz (12.2 g)
- Input Cells: 1S LiPo
- Output Voltage: 6 Volts
- Output Current: 3 Amps
- Wire Size: 20 GA silicone battery power wire (red/black)
- LED: Blue (on-board)
|
|
|
|